Payment & Shipping Terms:
|Product Name:||JSW TEX90 Screw Element||Application:||Polymer Compouding|
|Out Diameter:||More Than 20mm||Material:||SUS630|
|Standard:||Match Original Design||Type:||Coveying Element|
plastic extrusion parts,
plastic extruder parts
screw element for twin screw extruder
Kneading elements form an important functional part of the co-rotating twin screw extruder. The melting process is generally carried out in the kneading block. Standard kneading blocks are characterized by the length, number of discs and the offset angle between the discs.
In zones where there should be greater distribution, kneading blocks with narrow discs are used. Here too, the modular system offers virtually unlimited possibilities for process design.
We have established so-called shoulder kneading blocks. This means that the material is handled with greater care and in particular more evenly.
For the melting zone of modern high-performance extruders, the use of "eccentric" kneading blocks1 has proven successful. As only double-flight elements can be used symmetrically in deep cut machines, a triple-flight profile has been devised, which is positioned eccentrically. There is a tri-lobe kneading block with favourable feed angles, a low flight depth and full self-cleaning.
Hexagonal inner hole is very common among all brand extruder expecially for Japan twin screw extruder,attached is JSW TEX series extruder screw element,we can manufacture size from 25mm to 250mm,with all kinds of material to meet your need.
We are the first screw element manufacturer in China, with more than 20 years' manufacturing history, our screw element,barrel, shaft are produced by HIP material import from Germany to be same anti-wear& anti-corrosion , our customer including Europe extruder manufacturers, and world’s leading polymer compounders like Aschulman,Polyone,Covestro,DSM enginering plastic ,Lanxess.
Any questions,please feel free to contact us.
|Gen-00||Nitride steel||HV-950-1100||3||2||General Plastics|
|Gen-06||Ingot high speed steel||HRC-59-62||5||2||Engineering Plastics, Wear Resistance|
|Gen-11||Ingot Die Steel, SKD11 / D2/1.2379||HRC-58-63||4||2||General Plastics|
|Gen-44||Stainless steel SUS630||3||6||Engineering Plastics, Corrosive Resistance for Filler, FG Filler|
|Gen-09||CPM9V||6||6||Engineering Plastics,High Wear Resistance|
|Gen-10||Powder high spped steel X245/SAM10||HRc 61 ～ 65||8||3||Super Engineering Plastics, Wear Resistance for Filler, FG Filler|
|Gen-39||X235/SAM39||6||8||Super Engineering Plastics, Corrosive Resistance for Filler, FG Filler|
|Gen-60||ASP60/MM60||9||9||Super Engineering Plastics, Wear Resistance for Filler, FG Filler|
All dimensions including out diameter, Hole size tolerance, Root diameter,Parallelism of end surface,Verticality are in accordance with technical data.
Contact Person: Lee